Hi! Glad to have been pointed to this community. Looking forward to trying to see how I can help as well as learn from you all. I have a 2 part question that may be better in 2 posts but lets start here. This is the Infrastructure question. The 2nd will be about camera choices. ;-)

I have a 4 camera setup with a atem switcher and clearcom. I am looking to move my atem switcher and live stream computer to a broadcast room in a separate building. I need to rerun cables and this is what I'm considering, but not sure if I'm missing anything or should go another route.

4 Cameras: BMD Cinema Gen 1 x 2 / BMD Studio Cam Gen 1 / BMD Studio Cam 4k
Switcher: ATEM Production 4k 2 M/E
Storage: BMD Hyperdeck
Encoder: Boxcaster Pro - SDI IN from SWITCHER
Comms: 2 different versions of clearcom units all daisy chained together

My initial Plan:

We have a 150ft conduit that runs between buildings. We have a 150ft run from Cameras to Conduit

Add BMD Camera Convertors to each camera
Add BMD ATEM Talkback Convertor 4k to the Broadcast room for Tally, Comms, PGM return to Cam Ops
Connect Cameras using Tactical Fiber runs back to a Fiber Cassette
Fiber Cassette to Fiber Cassette in Broadcast room via 12 core fiber cable
Fiber then into Talkback Convertor 4k
Talkback Convertor to ATEM.

Might thoughts with this would be that we would then have all the cameras working to the switcher with comms working through BMD along with tally and even future camera control ( depending on the cameras )

I've never done anything like this so all this is based upon research. Would love some feedback or ideas to do it better. Even comments of people who have accomplished this and what you did wrong or right would be helpful. Like any church we are trying to be the best stewards of our money. Blessings, Jimmy